048 - VHP AGGRESSIVE CHEMICALS

Thermoplastic conductive hose for very high pressure aggressive chemicals applications from 310 to 700 bar (from 4500 to 10000 psi)
 src= src= src= src=
048 - VHP AGGRESSIVE CHEMICALS
   
part no.hose sizeIDODWPBPsafety factorbend radiusweightferrule part no.quantity
dashinchDNmminchmminchbar psi bar psimminchg/mlbs/ftstandardA316Lm
0482 -4 1/4 DN6 6,60 0,260 12,70 0,500 700 10000 2800 40000 4:1 35 1,38 180 0,121 SAF121 SAF821 217
0483 -5 5/16 DN8 8,10 0,319 16,00 0,630 700 10000 2800 40000 4:1 60 2,36 270 0,181 SAF131 SAF831 1.245
0484 -6 3/8 DN10 9,80 0,386 18,90 0,744 700 10000 2800 40000 4:1 90 3,54 320 0,215 SAF141 SAF841 200
0485 -8 1/2 DN12 13,00 0,512 23,20 0,913 590 8500 2360 34000 4:1 100 3,94 460 0,309 SAF151 SAF851 219
0486 -10 5/8 DN16 16,30 0,642 26,60 1,047 500 7200 2000 28800 4:1 160 6,30 570 0,383 SAF161 SAF861 8
0487 -12 3/4 DN20 19,50 0,768 30,50 1,201 450 6500 1800 26000 4:1 180 7,09 650 0,437 SAF171 SAF871 477
0488 -16 1 DN25 25,80 1,016 38,20 1,504 310 4500 1240 18000 4:1 250 9,84 950 0,638 SAF181 SAF881 438
pu foam
solvents and aggressive chemicals

INNER TUBE

Polyamide PA12

REINFORCEMENT

One or two braids of aramid fiber plus one braid of steel wire

COVER

Polyurethane up to 1/2", Special Polyester for 5/8" and upwards - black - non pinpricked - white ink-jet branding

APPLICATIONS

Very high pressure aggressive chemicals systems requiring very high mechanical strength of hose and/or electrical conductivity - Applications requiring high chemical resistance to solvents and aggressive fluids such as two parts polyurethane injection foams

FEATURES

Polyamide type 12 tube construction - Combined reinforcement for high pressure requirements and increased mechanical properties increasing lifetime of the hose under very harsh working conditions - Conductive

TEMPERATURE RANGE

-40 °C to +100 °C (-40 °F to +212 °F):limited to +70 °C (+158 °F) for air and water based fluids

DESCRIPTION

High pressure hose with black cover. Due to particularly low humidity absorption of the tube this hose is particularly indicated for two parts PU foams injection systems (isocyanate and polyols) and very aggressive chemicals applications with increased resistance to abrasion mechanical strength and providing electrical conductivity. Check compatibility list for overview of resistance to chemical substances and gases.