046 - VHP NON CONDUCTIVE

Constant pressure thermoplastic non-conductive hose for very high pressure hydraulic applications from 550 to 700 bar (8000 to 10000 psi)
 src= src= src=
046 - VHP NON CONDUCTIVE
   
part no.hose sizeIDODWPBPsafety factorbend radiusweightferrule part no.quantity
dashinchDNmminchmminchbar psi bar psimminchg/mlbs/ftstandardA316Lm
0460 -2 1/8 DN4 4,00 0,157 9,10 0,358 700 10.000 2.800 40.000 4:1 25 0,98 60 0,040 SAF101 SAF801 1.900
0461 -3 3/16 DN5 5,00 0,197 11,00 0,433 700 10.000 2.800 40.000 4:1 30 1,18 95 0,064 SAF111 SAF811 780
0462 -4 1/4 DN6 6,60 0,260 14,00 0,551 700 10.000 2.800 40.000 4:1 35 1,38 145 0,097 SAF121 SAF821 2.208
0464 -6 3/8 DN10 9,70 0,382 18,10 0,712 550 8.000 2.200 32.000 4:1 70 2,76 200 0,134 SAF141 SAF841
N/A
high tension wind turbines
rescue tooling
bolt tensioning
jacking applications

INNER TUBE

Polyester elastomer

REINFORCEMENT

Two braids of aramid fiber

COVER

Polyurethane - orange - black - inkjet branding

APPLICATIONS

Rescue and safety equipment - High pressure systems and pumps - Jacking and rerailing equipment - Equipment requiring electrical high insulation

FEATURES

Two aramid braids construction for compact design - Lightweight and flexible - Tight bend radii for use on hose reels and in tight environments - Antiabrasion cover.

TEMPERATURE RANGE

-40 °C to +100 °C (-40 °F to +212 °F): limited to +70 °C (+158 °F) for water based fluids

DESCRIPTION

Exceeds the former American Jacking Specifications - Very High Pressure hose suitable for petroleum or synthetic based hydraulic fluids in hydraulic systems - Aramid braid ensures longevity as well as pressure performance and compact design - for applications requiring electrical high insulation or non-conductivity in high tension environment e.g. near electrical power lines.

VACUUM RATING

-0,93 bar; -700 mm Hg|-13,5 psi; -27,5 inch Hg

SPECIFICATIONS

Hoses meet standards SAE J517/J343 and EN855 for non conductivity where maximum electrical leakage shall not exceed 50µA when a 152 mm sample is subject to 37.5 KV for 5 minutes equivalent to 250 KV/meter.

AVAILABLE INSERTS

046 - VHP NCdashinchDNF-BSPP M-BSPP F-NPTM-NPTF-DKOS
DIN 24°
M-CEL
DIN 24°
M-CES
DIN 24°
F-JICM-BSPT
0460 -2 1/8 DN4 SOA SOB - - - - - - -
0461 -3 3/16 DN5 SOA SOB - SOD - - - SOH -
0462 -4 1/4 DN6 SOA SOB SOC SOD SOM SOI SOL SOH SOO
0464 -6 3/8 DN10 SOA SOB - SOD SOM SOI SOL SOH -

 

Transfer Oil thermoplastic hose are compatible with many eco-fluids and biodegradable fluids, including many new ecological hydraulic oils, as used more often in the industry. Although these fluids are positive for the environment thanks to their ecological properties, at the same time they can be extremely aggressive on hoses, especially on traditional rubber hoses. It is everybody’s responsibility to respect our environment. In this way it is important to consider that Transfer Oil thermoplastic hoses, after their service life, can be recycled as raw material for non engineered products. A responsible choice for our future.