One or two braids of aramid fiber
Polyurethane - orange - black inkjet branding
High voltage equipment - Safety and rescue equipment - Aerial platforms - Cranes - Equipment requiring electrical high insulation
Aramid reinforcement for high pressure performance - Lightweight - Flexible - Compact - Bonded construction - Orange cover - Non pin-pricked - Abrasion resistant
-40 °C to +100 °C (-40 °F to +212 °F): limited to +70 °C ( +158 °F) for water based fluids
Meets or exceeds SAE 100R8 - High pressure hose suitable for petroleum or synthetic based hydraulic fluids used in hydraulic applications requiring electrical high insulation or non-conductivity in high tension environment e.g. near electrical power lines. Approved by MSHA - Mine Safety and Health Administration - number IC-305.
-0,93 bar; -700 mm Hg|-13,5 psi; -27,5 inch Hg
SAE 100R8 // EN855-R8 // ISO3949-R8
Hoses meet standards SAE J517/J343 and EN855 for non conductivity where maximum electrical leakage shall not exceed 50μA when a 152 mm sample is subject to 37.5 KV for 5 minutes equivalent to 250 KV/meter.
Transfer Oil thermoplastic hose are compatible with many eco-fluids and biodegradable fluids, including many new ecological hydraulic oils, as used more often in the industry. Although these fluids are positive for the environment thanks to their ecological properties, at the same time they can be extremely aggressive on hoses, especially on traditional rubber hoses. It is everybody’s responsibility to respect our environment. In this way it is important to consider that Transfer Oil thermoplastic hoses, after their service life, can be recycled as raw material for non engineered products. A responsible choice for our future.