075 - R8 ANTIABRASION

Thermoplastic hose MSHA approved for high pressure hydraulic applications from 140 to 420 bar (2000 to 6000 psi)

 src=  src=  src=

075X - R8 ANTIABRASION
   
part no.hose sizeIDODWPBPsafety factorbend radiusweightferrule part no.quantity
dashinchDNmminchmminchbar psi bar psimminchg/mlbs/ftstandardA316Lm
0750 -2 1/8 DN4 4,00 0,157 8,00 0,315 420 6.000 1.680 24.000 4:1 25 0,98 45 0,030 SAB101 SAB801 8.746
0751 -3 3/16 DN5 5,00 0,197 8,90 0,350 350 5.000 1.400 20.000 4:1 30 1,18 50 0,034 SAB111 SAB811 1.893
0752 -4 1/4 DN6 6,50 0,256 11,50 0,453 350 5.000 1.400 20.000 4:1 50 1,97 85 0,057 SAB121 SAB821 5.247
0753 -5 5/16 DN8 8,10 0,319 13,40 0,528 300 4.300 1.200 17.200 4:1 55 2,17 105 0,071 SAB131 SAB831 10.461
0754 -6 3/8 DN10 9,70 0,382 15,50 0,610 280 4.000 1.120 16.000 4:1 60 2,36 135 0,091 SAB141 SAB841 17.740
0755 -8 1/2 DN12 13,00 0,512 19,90 0,783 245 3.500 980 14.000 4:1 80 3,15 200 0,134 SAB151 SAB851 4.736
0756 -10 5/8 DN16 16,30 0,642 23,40 0,921 200 2.900 800 11.600 4:1 125 4,92 250 0,168 SAB161 SAB861 128
0757 -12 3/4 DN20 19,50 0,768 27,10 1,067 165 2.300 660 9.200 4:1 150 5,91 320 0,215 SAB171 SAB871 1.248
0758 -16 1 DN25 25,90 1,020 34,20 1,346 140 2.000 560 8.000 4:1 200 7,87 440 0,296 SAB181 SAB881 411
rescue tooling
mining
loader cranes
bolt tensioning
hose reels
car transporter
articulating booms
cherry pickers
forklift
power chains
jacking applications
scissor lifts
high pressure industrial gases
tower cranes
earth moving equipments
machine tools
hydraulic systems for agricultural equipment
cabin lift
agricultural sprayer
telehandlers

INNER TUBE

Polyester elastomer

REINFORCEMENT

One or two braids of aramid fiber

COVER

Polyurethane - black - pinpricked - white inkjet branding

APPLICATIONS

Construction and agricultural equipment - Forklift trucks - Articulating and telescopic booms - Aerial platforms - Safety and rescue equipment - Scissor lifts - Cranes - General hydraulics - Industrial gases

FEATURES

Aramid reinforcement for high pressure performance - Compact and lightweight - Bonded construction - Abrasion resistant - Extremely low change in length - Pin-pricked cover

TEMPERATURE RANGE

-40 °C to +100 °C (-40 °F to +212 °F): limited to +70 °C ( +158 °F) for air and water based fluids

DESCRIPTION

Meets or exceeds SAE 100R8 - Compact high pressure hose suitable for hydraulic applications with increased resistance to abrasion and very low expansion. For use with petroleum or synthetic or water based hydraulic fluids in hydraulic systems. Suitable for general fluid power transmissions like earthmoving or agricultural machinery or forklifts trucks and other high pressure equipment. Also suitable for many industrial gases (check for compatibility). Approved by MSHA - Mine Safety and Health Administration - number IC-305.

VACUUM RATING

-0,93 bar; -700 mm Hg|-13,5 psi; -27,5 inch Hg

SPECIFICATIONS

SAE 100R8 // EN855-R8 // ISO3949-R8

Transfer Oil thermoplastic hose are compatible with many eco-fluids and biodegradable fluids, including many new ecological hydraulic oils, as used more often in the industry. Although these fluids are positive for the environment thanks to their ecological properties, at the same time they can be extremely aggressive on hoses, especially on traditional rubber hoses. It is everybody’s responsibility to respect our environment. In this way it is important to consider that Transfer Oil thermoplastic hoses, after their service life, can be recycled as raw material for non engineered products. A responsible choice for our future.