155 - R18 CPLT 3000 NC - CONSTANT PRESSURE NON COND.

Thermoplastic constant pressure non-conductive hose with low temperature specifications (-55°C / -67 °F) for hydraulic applications up to 210 bar (3000 psi)

 src=  src=  src=

155 - R18 CPLT 3000 NC - CONSTANT PRESSURE LOW TEMP NON CONDUCTIVE
   
part no.hose sizeIDODWPBPsafety factorbend radiusweightferrule part no.quantity
dashinchDNmminchmminchbar psi bar psimminchg/mlbs/ftstandardA316Lm
1551 -3 3/16 DN5 5,00 0,197 9,60 0,378 210 3.000 840 12.000 4:1 25 0,98 60 0,040 SAB111 SAB811 580
1552 -4 1/4 DN6 6,50 0,256 12,20 0,480 210 3.000 840 12.000 4:1 35 1,38 100 0,067 SAB121 SAB821 612
1553 -5 5/16 DN8 8,10 0,319 14,30 0,563 210 3.000 840 12.000 4:1 45 1,77 130 0,087 SAB131 SAB831
N/A
1554 -6 3/8 DN10 9,70 0,382 16,60 0,654 210 3.000 840 12.000 4:1 45 1,77 165 0,111 SAB141 SAB841 1.706
1555 -8 1/2 DN12 13,00 0,512 22,50 0,886 210 3.000 840 12.000 4:1 70 2,76 295 0,198 SA5151  SA5851
N/A
1556 -10 5/8 DN16 16,30 0,642 26,10 1,028 210 3.000 840 12.000 4:1 100 3,94 370 0,249 SA5161 SA5861 263
high tension wind turbines
low temperature environement
articulating booms
cherry pickers
scissor lifts

INNER TUBE

Polyester elastomer

REINFORCEMENT

One or two braids of synthetic fiber

COVER

Special polyester - orange - non pinpricked - black ink-jet branding

APPLICATIONS

High voltage equipment - Aerial platforms - All industrial and hydraulic applications exposed to low temperatures or cyclic and quick temperature changes

FEATURES

2 polyester braid construction from 1/4"-DN6 onwards - Optimum bonding between the tube the braids and cover - Special polyester cover resistant to low temperatures and meteorological harsh conditions - Tight bend radii without cover wrinkling

TEMPERATURE RANGE

-55 °C to +100 °C (-67 °F to +212 °F): limited to +70 °C (+158 °F) for water based fluids

DESCRIPTION

Meets or exceeds SAE 100R18 specifications - Medium pressure hose suitable for petroleum or synthetic based hydraulic fluids in hydraulic systems requiring electrical high insulation or non-conductivity in high tension environment. Optimum bonding characteristics and special cover also make it the ideal hose for equipment operating in cold environments while maintaining a high level of flexibility.

VACUUM RATING

-0,93 bar; -700 mm Hg|-13,5 psi; -27,5 inch Hg

SPECIFICATIONS

SAE 100R18 // ISO3949-R18
Hoses meet standards SAE J517/J343 and EN855 for non conductivity where maximum electrical leakage shall not exceed 50μA when a 152 mm sample is subject to 37.5 KV for 5 minutes equivalent to 250 KV/meter.

Transfer Oil thermoplastic hose are compatible with many eco-fluids and biodegradable fluids, including many new ecological hydraulic oils, as used more often in the industry. Although these fluids are positive for the environment thanks to their ecological properties, at the same time they can be extremely aggressive on hoses, especially on traditional rubber hoses. It is everybody’s responsibility to respect our environment. In this way it is important to consider that Transfer Oil thermoplastic hoses, after their service life, can be recycled as raw material for non engineered products. A responsible choice for our future.