Change of nominal ID 1/4" 1SB - Single Steel Braid

The 1SB - Single steel braid hose size 1 / 4 "| DN6 | -4, will benefit from a constructive design  intervention changing the size of the nominal internal diameter.

Rating:
100%
 (1 votes)

COLORNO, Italy – October 10, 2011 - A dynamic company is also characterized by listening to customer needs and adapting its products. Based on some reports of users with the aim of facilitating the insertion of the tail of the insert there will be an increase of the diameter of the internal tube of about a tenth of a millimeter.

Currently the nominal ID tube is
6,4 mm (0,252 inches) and will switch to 6,5 mm (0,256 inches).

Clearly, this action will have a slight implication also on the outside diameter (OD), rising from 11.6 mm
(0,457 inches) to 11.7 mm (0,461 inches).

This small but significant change will not affect the ferrule in use today and the crimping diameter, which will remain unchanged.

The products affected by this modification are:

0872 - 1SB STEEL BRAID ANTIABRASION
0562 - 1SB STEEL BRAID MARINER
0582 - 1SB STEEL BRAID YACHTING
0502 - STEEL BRAID CO2 FIRE EXTINGUISHING
0832 - 1SB STEEL BRAID PAINT SPRAY AND SOLVENTS
0832BP - 1SB STEEL BRAID PAINT SPRAY AND SOLVENTS

All twin / multi-line hoses and customized hoses (branding, colours) derived from Transfer Oil standard hose, will benefit from this amendment.

In order to optimize traceability, we want to point out that all new Batch starting from Number V11315 meet new characteristics as per this note.



Our sales team is available to provide any further information you may require. Contact us at our e-mail address sales@transferoil.com

Transfer Oil S.p.A., founded in 1979, are today one of the major independent thermoplastic hose manufacturer for medium, high and very high pressures.

Through a network made of the most relevant distributors of each industry, Transfer Oil hose products are distributed in 65 different countries.

With a total capacity of more than 13 million meters (42 million feet) per year, Transfer Oil are active in several industries such as general hydraulic systems for fork-lifts, aerial platforms, cranes, mobile devices, rescue tooling, or industrial application such as high pressure sewer jetting, hydrogen & CNG refilling systems, gas and water supply, paint spray markets, air conditioning and refrigeration but also niche markets such as air breathing, high temperature applications and aggressive fluids are being serviced with Transfer Oil hoses.

Today range count three major segments: TO HYDRAULIC (thermoplastic hoses for hydraulic applications), TO INDUSTRIAL (thermoplastic hoses for industrial applications) and GOMAX (thermoplastic hoses and fittings for air conditioning and refrigeration).

For more information, please do not hesitate to contact our sales office:

 

Transfer Oil S.p.A.
Via Sacca, 64
43052 - Colorno
Parma
Italy

sales@transferoil.com

tel. +39 0521 3139 or 011 39 0521 3139 (for USA and Canada)
fax +39 0521 814160 or 011 39 0521 814160 (for USA and Canada)

Comments

Transfer Oil Sales & Marketing Team - 16/11/2011 14.30.40
Dear Mr. Abdulla,

Thank you for your enquiry.
You will be shortly contacted by a colleague, to follow up of your request.

Kindest regards
Transfer Oil Sales & Marketing Team
ali - 16/11/2011 14.00.26
dear sir ,

i am looking for fitting for thermoplastic houes OD 5.9 MM AND ID 2 MM SINGEL BARRIED HOSE .

I NEED 1/4 " FLARE FITTING AND FARRULS 90 DEGREE A AND STRIGHT .

ABDULLA

Insert a comment

Nickname
Mandatory field
First name
Mandatory field - Not shown on comment
Company
Not shown on comment
e-mail
Mandatory field - Not shown on comment
retype e-mail
Comment
 
Currently the nominal ID tube is 6.4 mm and will switch to 6.5 mm.

Latest News

Happy to welcome you at Transfer Oil booth

Easy tubing preparation directly onsite