TO HYDRAULIC Products

Thermoplastic hoses for hydraulic applications

PILOT FL

Compact lightweight hose for servo control applications from 100 to 175 bar (1400 to 2500 psi)

SAE 100R7

Thermoplastic hose for hydraulic applications from 70 to 210 bar (1000 to 3000 psi)

ANSI A92.2

Thermoplastic hose for hydraulic applications from 90 to 210 bar (1300 to 3000 psi)

1SB - STEEL BRAID

Thermoplastic hose with steel reinforcement for hydraulic applications from 95 to 360 bar (1300 to 5200 psi)

SAE 100R8

Thermoplastic hose for high pressure hydraulic applications from 140 to 420 bar (2000 to 6000 psi)

HR8

Thermoplastic hose with combined reinforcement for very high pressure hydraulic applications from 250 to 350 bar (3600 to 5000 psi)

2SB - TWO STEEL BRAIDS

Thermoplastic hose with double steel reinforcement for high pressure hydraulic applications from 150 to 400 bar (2100 to 5800 psi)

HDH

Thermoplastic hose with combined reinforcement for very high pressure hydraulic applications from 250 to 500 bar (3600 to 7200 psi)

SAE 100R18 CPLT 3000

Thermoplastic constant pressure hose with low temperature specifications (-55 °C/-67 °F) for hydraulic applications up to 210 bar (3000 psi)

CPLT 3600

Thermoplastic constant pressure hose with low temperature specifications (-55°C/-67 °F) for hydraulic applications up to 250 bar (3600 psi)

CPLT 5000

Thermoplastic constant pressure hose with low temperature specifications (-55 °C/-67 °F) for hydraulic applications up to 350 bar (5000 psi)

CPHR 5000

Thermoplastic constant pressure hose with combined reinforcement for very high pressure hydraulic applications up to 350 bar (up to 5000 psi)

VHP

Thermoplastic constant pressure hose for very high pressure hydraulic applications from 550 to 800 bar (8000 to 11500 psi)

OFF SHORE MASTER

Thermoplastic constant pressure hose for off-shore high pressure hydraulic applications up to 350 bar (5000 psi)

MICRO BORE

Thermoplastic constant pressure Micro bore hose for testing and hydraulic applications up to 630 bar (9100 psi)

TWIN HOSE

Twin hose produced by TRANSFER OIL are a result of the joining of two or more hoses by means of a procedure that is unique in the industry and does not undermine the hose integrity. The joining can be made between hose of the same size and specification or between different hose type and size. It is also possible to join electric cable and wires. The use of twin hoses allows simplifying of application requirements: fluid flow, connections to hydraulic and electric supply etc. This item is supplied in coils by TRANSFER OIL. An additional operation is required for assembly involving splitting the twin hose. Proper separation instructions are contained within the “thermoplastic hose installation factors” section.

TRANSFER OIL offer more solutions than the hoses shown here, personalised hose combinations of different types or diameters can also be produced. It is also possible to join hoses to electrical and optical cables.